KS42 Shadowline |
 |
APPLICATIONS:
KS42 Shadowline panels are a multi-use insulated cladding suitable for exterior wall envelopes in industrial applications including warehouses, manufacturing plants, service and utility buildings as well as refrigerated or freezer buildings, food processing, pharmaceutical and controlled environment areas.
Kingspan Insulated Panels provide designers with a wide range of practical and aesthetically pleasing design flexibilities. The superior joint engineering assures a tight, well designed vapor barrier and building envelope.
CONSTRUCTION:
KS42 Shadowline panels are constructed with a non-CFC thermosetting polyurethane insulation that meets US and Canadian building code requirements. Steel facings are precisely roll formed and foam insulation is expanded between the metal sheets in a state-of-the-art continuous line production sequence that is fully computerized to ensure optimum quality and consistency in every panel.
INSULATION:
KS42 Shadowline panels with foamed polyurethane insulation are
offered in thicknesses of 2", 2-1/2" 3", 4", 5" & 6" providing the highest R-value of any commonly available insulation product.
FACINGS:
KS42 Shadowline panels have a standard 26 gauge face of stucco embossed galvanized steel to ASTM A653 G-90 or galvalume designation. The base steel is a structural quality to minimum Grade “A” 33 ksi, conforming to ASTM A924. Consult factory for optional panel facings of stainless steel in various gauges.
COATING SYSTEMS:
Standard KS42 Shadowline panel finishes are Imperial White SMP - Silicone modified polyester CFIA and USDA approved with a nominal dry film thickness of 1.0 Mil including 0.2 Mil primer.
Optional finishes include Kynar PVF2; plastisol and polyester coatings in a range of stock and special order colors.
PANEL DESIGN:
KS42 Shadowline panels utilize a superior joint design providing
concealed fastener anchorage affording connection of both metal skins
to the building structure, double caulk seal provision and excellent
air
infiltration and water penetration test results.
Panels are produced in the attractive "SHADOWLINE" stucco embossed profile on both the exterior and interior face.
Panel coverage is available in standard 42" width.
KS42 Shadowline
PERFORMANCE REQUIREMENTS:
FIRE:
Meets special requirements of US and Canadian model building codes and
is listed and approved by the following authorities.
ULI |
Underwriters Laboratories Inc. |
FM |
Factory Mutual |
WH |
Warnock Hersey |
ULC |
Underwriters Laboratories Canada |
NYC |
MEA report |
FM-4880 - Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems
ASTM-E84 Flame Spread - 20; smoke developed 350 for foam core
CAN/ULC S101 Passed Fire Endurance Tests without fastening joint seams
CAN/ULC S102 Flame Spread 20; smoke developed 350 for foam core
ULC/ORD-C376 - Fire growth of foamed plastic insulated building panels in a full scale room configuration
CAN/ULC -S126 - Standard method of test for fire spread under roof deck assemblies
CAN/ULC -S134, Standard method of fire test of exterior wall assemblies
UBC 26-4 Passed Multi-story test with standard panels
THERMAL TRANSMISSION:
ASTM C518 - see product specifications
ASTM C236 - see product specifications
VAPOR BARRIER:
ASTM E283 Air infiltration - see product specifications
ASTM E331 Water penetration - see product specifications
STRUCTURAL:
FM-4881 - Approval Standard for Class 1 Exterior Wall Systems
ASTM E72 Vacuum chamber test
FATIGUE TEST: Panels were tested by independent laboratories for long term deflection failure. The panels exceeded 2 million alternate cycles without failure or damage.
BOND STRENGTH:
ASTM D1623 Panel was tested for tensile bond strength of the metal to
foam interface to 24 psi.
KS42 Shadowline - Allowable Uniform Loads [PSF] for Multiple Span Condition
 |
SKIN GA. |
THICKNESS |
SPAN [FEET] | |||||||||||||||||
| DEFL.r | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | ||||
|
2" | 71.1 | 56.1 | 45.5 | 37.1 | 30.9 | 25.9 | 22.0 | 18.7 | 16.2 | 14.0 | 12.1 | 10.4 | |||||||
| 2-1/2" | 83.3 | 66.2 | 53.9 | 44.7 | 37.6 | 31.9 | 27.3 | 23.5 | 20.5 | 17.8 | 15.6 | 13.7 | ||||||||
| 3" | 101.6 | 81.5 | 67.0 | 56.2 | 47.7 | 40.8 | 35.2 | 30.6 | 26.9 | 23.6 | 20.8 | 18.6 | 16.9 | |||||||
| 4" | 121.9 | 98.8 | 82.2 | 69.6 | 59.8 | 51.9 | 45.4 | 40.0 | 35.5 | 31.6 | 28.2 | 25.2 | 22.5 | 19.8 | 17.9 | 15.9 | ||||
| 5" | 171.7 | 139.1 | 116.7 | 100.4 | 86.2 | 74.0 | 65.4 | 57.2 | 51.0 | 44.6 | 40.5 | 36.2 | 32.6 | 30.0 | 26.7 | 24.5 | ||||
| 6" | 199.7 | 163.8 | 135.6 | 116.3 | 99.7 | 87.9 | 77.8 | 67.9 | 59.8 | 54.0 | 48.2 | 44.1 | 39.2 | 36.1 | 32.7 | 29.5 | ||||
Allowable loads shown above are for a positive
wind loads with deflection limit to 1/180. Consult factory for
maximum allowable negative wind loads and panel fastening pattern. Thermal
loads have not been considered.